Open the on your PC and navigate to Device Manager . Locate the VCDS interface under USB controllers.
Right-click it, select , go to the Details tab, and select Hardware Ids from the dropdown menu.
The "Revoked" license status in VCDS typically occurs when the software detects an unauthorized or "clone" interface, or if a genuine device's internal security certificates have expired or been flagged. For Genuine Ross-Tech Interfaces
If you are using a Ross-Tech VCDS (VAG-COM Diagnostic System) clone cable and suddenly see a or "Interface Not Found" error, your device has been blacklisted. This happens because the official VCDS software detects unauthorized hardware clones during an internet update and modifies the cable's internal EEPROM firmware to disable it.
Once you have successfully restored your interface, take these preventative measures to ensure it stays functional: vcds revoked fix
Click write. Wait for the verification process to hit 100% success. Step 4: Reassembly and Testing Unplug the programmer and desolder any temporary wires.
The most common cause is using a cheap clone cable (often sold online as "VCDS HEX-V2" or "Vag Com" at a fraction of the retail price).
A "VCDS Revoked" error indicates that the software license embedded in your Ross-Tech interface is no longer recognized as valid, often due to using non-genuine hardware with official software or data corruption during a firmware update. To fix this, you can try , forcing a firmware update through the VCI Config utility, or reinstalling the USB drivers from the official Ross-Tech site . Understanding the "VCDS Revoked" Error
Always turn off your laptop's Wi-Fi network before opening the diagnostic software. Open the on your PC and navigate to Device Manager
Often, the software only targets the FTDI chip's USB descriptors to prevent Windows from recognizing the device. Plug the revoked VCDS cable into your PC via USB. Download and launch . Click Devices > Scan and Parse .
For clone users, the situation is more complex and uncertain. The internet is filled with unreliable "loaders" and risky reflashing guides. These temporary measures often create more problems than they solve, leading to endless troubleshooting cycles.
to reset the cable’s internal data and clear the "revoked" flag. The "Air-Gap" Method:
Click on in the left panel, then select New Rule on the right side. Choose Program and click Next. Browse to the path of your VCDS.exe executable file. Select Block the connection . The "Revoked" license status in VCDS typically occurs
In simple terms, "Revoked" means the software has deliberately disabled your interface cable (dongle). Unlike a simple "not connected" error, a revocation is a security measure.
If the test succeeds, open the VCI Config utility (often found in the VCDS installation folder or via the prompt).
VCDS (Vag-Com Diagnostic System) is a diagnostic tool for Volkswagen Audi Group vehicles. Unlike typical software, the license for VCDS is tied directly to the hardware interface (the cable).
VCDS is a software tool developed by Ross-Tech, LLC, designed to communicate with Volkswagen and Audi vehicles. It allows users to diagnose and troubleshoot issues, as well as modify various settings on their vehicles. VCDS uses a proprietary interface, known as the VAG-COM interface, to connect to the vehicle's onboard computer.