Windows 11: Driver Easycap

Navigate to > Advanced options > Startup Settings and click Restart .

Here are the primary methods for installing your EasyCAP driver. Many users have found success with the manual, chipset-specific method.

Getting an device to work on Windows 11 can be tricky because "EasyCap" isn't a single brand, but a name used for various internal chipsets like UTV007 or SMI Grabber . 1. Identifying Your Hardware

If you have the CD that came with your device, it may contain a working driver:

Open , right-click your EasyCap device, and select Update driver . Click Browse my computer for drivers . driver easycap windows 11

is a common challenge because these inexpensive USB dongles often use various internal chipsets that Windows 11 may not recognize automatically. [1, 2] Key Features and Compatibility Plug-and-Play (Limited):

After installation, your device should function correctly. If you encounter an error, continue to the troubleshooting section.

: Plug in the device and open Device Manager . Look for an "Unknown Device" or "usbtv007." Right-click it, select Properties , and check the Hardware ID under the Details tab to find the specific driver needed.

To install the correct driver, you must first identify which chipset your specific device uses. Step 1: Identify Your EasyCap Chipset Navigate to > Advanced options > Startup Settings

The software bundled with EasyCap (like Honest Tech) is often outdated. Most users recommend OBS Studio for capturing video.

EasyCap (Various Clones) OS: Windows 11 (Versions 22H2 / 23H2) Verdict: A functional nostalgia trip, but only for the tech-savvy and patient.

This is a classic error for EasyCAP on modern Windows, often caused by driver conflicts.

Windows power management is temporarily disabling the USB port to save energy. Getting an device to work on Windows 11

As of 2026, Windows 11's enhanced security, specifically , often blocks the old, unsigned drivers that EasyCap devices require.

Free. Go to Media > Open Capture Device , set the Capture Mode to DirectShow , and select your EasyCap under the Video Device Name.

Press the , type Core Isolation , and press Enter . Locate the Memory Integrity toggle switch. Turn the switch Off . Restart your computer for the changes to take effect.