However, like many inkjet printers, the E510 has a built-in counter that tracks the amount of ink used for cleaning cycles. This ink waste is collected in a "waste ink absorber" pad inside the printer. When this counter reaches a pre-determined limit, the printer will stop working to prevent an overflow of waste ink. It will display an error message (often support code ) and lock up, even if the ink tanks are full.
Keep holding the button, and release the Stop/Reset button.
Release both buttons. The green light should blink and then stay steady, indicating the printer is in Service Mode. 2. Using Resetter Software (Service Tool) resetter canon e510
Right-click the downloaded executable file and select .
If you reset the counter multiple times without cleaning or replacing the internal felt absorbers, the waste ink will eventually overflow out of the bottom of the printer casing. What You Should Do Long-Term: However, like many inkjet printers, the E510 has
Release the Power button. The green light should stay solid, indicating the printer is in Service Mode.
For the Canon Pixma E510, or v3600 is the most compatible and widely tested version. Avoid unverified versions (like v5000+ downloaded from shady sources), as mismatched or corrupt service tools can permanently freeze your printer's logic board (commonly known as "bricking"). Safety and Downloading Best Practices: It will display an error message (often support
The reset software cannot communicate with the printer while it is in normal operation or error mode. You must manually force the hardware into first. Follow these precise steps:
Once your printer is securely in Service Mode, it is ready to accept commands from the resetter utility.
Press the again to turn the printer back on normally.