Flip the tank right-side up and align it onto the humidifier base. The water will begin releasing into the base reservoir. Turning On and Adjusting Mist
Ultrasonic humidifiers require weekly cleaning to prevent mold and bacteria growth, and to remove mineral buildup on the transducer.
By following this , you can ensure comfortable, breathable air throughout your home.
Rotate the knob or tap the control icon to adjust the mist output to your preferred level. equate ultrasonic humidifier user manual
Perform the deep cleaning and sanitizing procedures immediately. Tank cap is cross-threaded or loose. Unscrew the cap and securely retighten it. The tank is cracked or damaged. Inspect the tank for physical damage; replace if cracked. If you need tailored help with your appliance, let me know:
Clean and sanitize the humidifier immediately using the weekly cleaning instructions. Frequently Asked Questions
If the unit was stored in a cold environment, let it sit at room temperature for 30 minutes before plugging it in. 4. Operating Instructions Flip the tank right-side up and align it
Clean the transducer (metal disc) to remove mineral buildup. Ensure the water level is not too high.
Fill the water tank with 2 cups of undiluted white vinegar. Fasten the cap and shake vigorously. Let it sit for 20 minutes.
After refilling the tank, wait 30 seconds for the water to flow into the base before turning the unit back on. By following this , you can ensure comfortable,
Empty any remaining water from both the tank and the base reservoir. Rinse the tank thoroughly with clean, lukewarm water.
Fill the tank with clean, cold water. Distilled or demineralized water is highly recommended to prevent white dust buildup caused by minerals. Screw the tank cap back on clockwise until it is tight. Wipe any excess water from the outside of the tank.