Digi Sm500 Scale User Manual Exclusive !new! Jun 2026

Turn the scale on while holding down the (or designated function) key to enter Z Mode (Calibration Mode).

Mastering the control interface allows managers to switch modes smoothly without accidentally altering calibrated settings.

Page two changed her life.

Setting up your correctly is the first step to accurate weighing.

The display hesitated. Then: .

Ensure a blank backing paper strip (with no label attached) is positioned directly over the sensor eye.

Understanding the hardware baseline ensures proper environment setup and accurate power delivery.

Thread the label leading edge under the tension bar and through the gap sensor slot. Peel off the first 3 to 4 labels from the backing paper.

Press the or End key to save changes and restart the scale. 3. PLU Programming and Memory Management digi sm500 scale user manual exclusive

Press the key until the display reads S1.1 (PLU File Programming).

Ethernet and optional wireless options for data management.

Input the desired PLU number (e.g., 101 ) using the numeric keypad and press .

The display will flash the required calibration weight (e.g., 15.000 kg or 30.000 lb ). Turn the scale on while holding down the

If you use identical, standardized boxes, you can manually type in a known weight profile. Ensure the scale platter is completely empty.

The physical calibration switch prevents accidental modification of the scale's internal span values. Turn off the scale power switch.

The requested PLU number does not exist. Reprogram the PLU or sync via back-office software. Printer head open

: Delivers speeds up to 150mm/second , minimizing transaction wait times during peak hours. Setting up your correctly is the first step