Xprinter Xp-420b Wifi Setup !!install!! Jun 2026

Enter the printer’s IP address or click "Search" to let the app auto-detect the XP-420B.

A (included in the box) to temporarily connect the printer to your PC. Your local Wi-Fi Network Name (SSID) and Wi-Fi Password .

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Now that the printer is on your WiFi, you must add it as a networked device on your PC: Open Settings Devices > Printers & scanners and select Add a printer Add Manually : Select "The printer that I want isn't listed" and choose Add a printer using an IP address or hostname : Type the IP address you copied earlier into the field. : Ensure the port is set to Standard TCP/IP Port : Select the Xprinter XP-420B driver (previously downloaded and installed). BarTender Software 4. Mobile Setup (Android/iOS) To print from your phone, use the Print Label app (available on Google Play and the App Store). : In the app's settings, change the Connection method Configuration : Enter the printer’s Static IP address that you set during Step 2. Alternative (WiFi Direct) : Some versions support WiFi Direct xprinter xp-420b wifi setup

Set your label sizes (typically 100mm x 150mm for 4x6 shipping labels) and run a test print. Troubleshooting Common Issues

Navigate to the or IP Setup section within the tool. Disable DHCP and select Static IP .

:

Under , select USB and click Connect or Check Printer Status to verify communication.

Your Wi-Fi network name (SSID) and password. Note that most thermal printers require a rather than a 5GHz network. Method 1: Wi-Fi Setup via Windows Tool (Recommended)

Click Next. When prompted for a driver, select , browse to your downloaded Xprinter driver folder, and select the XP-420B model. Adding to Mac: Open System Settings > Printers & Scanners . Enter the printer’s IP address or click "Search"

: Assign a static IP address to the printer during this stage to prevent connection drops if the router reassigns IP addresses (DHCP).

The initial configuration usually requires a Windows computer to configure the network settings. USB Cable: Required temporarily for the initial setup. Wi-Fi Network Name (SSID) and Password.

Save changes and restart the printer. Revert your computer's IP settings back to automatic. Installing the Wi-Fi Printer Driver on Your Computer This public link is valid for 7 days

Open the driver setup program (usually Xprinter Driver Setup.exe ). Select Printer: Choose the XP-420B model.