Autokent Mvci Multi Driver X64 Install !link! Site
Do not plug your MVCI or Mini VCI USB cable into the computer until the driver installation software prompts you or until the installation is complete.
Click when the Windows User Account Control prompt asks for confirmation.
Before you connect your MVCI to a vehicle, confirm:
Step 2: Disable Driver Signature Enforcement (For Windows 10/11 x64) autokent mvci multi driver x64 install
| Error Code | Message | Solution | | :--- | :--- | :--- | | | Unsigned driver | You forgot to disable signature enforcement. Reboot into the special startup settings. | | Code 10 | Device cannot start | USB power issue. Use a powered USB hub or change ports. Re-flash firmware. | | Code 28 | Driver not installed | Windows did not find the INF file. Manually select “Have Disk” and point to the .inf in the x64 folder. | | Device vanishes | Disconnects randomly | Bad USB cable. Replace with a shielded, short (1m) USB 2.0 cable. |
. If the fields (Firmware, SN) populate, your cable is correctly recognized by the 64-bit system. Configuring Techstream VIM Selection : Open Techstream and go to VIM Select . In the dropdown menu, select "XHorse - MVCI" "Autokent-X64" IT3System.ini Tweak : If Techstream fails to launch properly, navigate to
You should consider using the Autokent MVCI MultiDriver x64 if you experience any of the following symptoms: Do not plug your MVCI or Mini VCI
: Run the Driver MVCI x64.exe as an administrator. Select the appropriate firmware version for your cable.
Before starting, ensure you have the following:
Windows 7, 8, 10, or 11 (64-bit versions). Reboot into the special startup settings
The AutoKent package generally includes a firmware identification tool to verify communication between the PC and the cable's internal chip.
The Autokent installer usually handles registry routing automatically, but manual verification ensures software compatibility: Press Windows Key + R , type regedit , and hit Enter.