Ericsson Mini Link Cli Commands «GENUINE»

: Exports the configuration file securely to a centralized server for disaster recovery purposes. To help customize this guide further, let me know:

user wants a comprehensive, long-form article on Ericsson Mini-Link CLI commands. I need to gather authoritative information on this topic. My search plan includes four phases: product overview, CLI command categories, configuration examples, and troubleshooting. I'll start by executing searches for general CLI reference, command categories, configuration guides, troubleshooting, and user experiences. search results for the initial phase are not showing comprehensive official CLI command references. The searches for "Ericsson Mini-Link CLI commands reference guide" and "Ericsson MINI-LINK TN CLI command list categories" returned a Broadcom document and some low-quality results. The search for "Ericsson Mini-Link CN 5100 CLI configuration guide" returned unrelated ENM commands. The search for "Ericsson Mini-Link CLI troubleshooting commands" returned no results. The site-specific search for "Ericsson MINI-LINK CLI show commands" returned a general product page. The search for "Ericsson Mini-Link CLI commands PDF" returned some documents on synchronization and DCN configuration. The search for "Ericsson Mini-Link CLI configuration examples" on the community site returned no results. The search for "MINI-LINK" CLI commands experience returned a Broadcom document and a PDF on E-band commissioning. The overall search results for general references are not satisfactory. I need to search for more specific product model CLI guides, such as for the 6352 model, and also look for CLI command lists from sources like manualslib.com and scribd. I will also search for "Ericsson MINI-LINK CLI reference" and "MINI-LINK CLI commands list". search results for specific model CLI guides and command lists are also not yielding comprehensive official documentation. The results include a PDF on E-band commissioning, a forum post discussing CLI commands, a management tools page, and a Broadcom document. I need to find more substantial sources. I will now search for "Ericsson MINI-LINK CLI commands PDF download" and "MINI-LINK TN CLI reference manual". search results for "Ericsson Mini-Link CLI commands pdf" and other variations are not showing a comprehensive command reference. However, there are some documents that might contain CLI commands. I will open the "Configuring Network Synchronization" PDF, the "Configuring DCN" PDF, the "Ericsson MINI-LINK 6351 Technical Description" page, the "715255153-MINI-LINK-6352-Eband-Commissioning-1.pdf", the "Management Tools And Interfaces - Ericsson MINI-LINK TN R3 ETSI Technical Description" page, and the "Mini link TN CLI" forum post. I will also open the "Ericsson.MINI_LINK" page from getnoc.com, which lists supported scripts. Additionally, I will open the "Network Configuration Management by ManageEngine" page for configuration commands. Finally, I will search for "MINI-LINK CLI Tool" more specifically. ManageEngine page provides some CLI commands for backup, syslog, and sync. The getnoc.com page lists many "get" commands. The forum post mentions "show" commands. The synchronization and DCN PDFs might contain CLI command examples. The 6351 technical description provides an overview. The 6352 commissioning PDF includes CLI usage. I have gathered some information. I should also search for more specific command references like "show rl aim running-config" and "show version". I'll search for "show rl aim running-config" and "show startup-config mini-link". search results for "show rl aim running-config" and "show startup-config" did not yield additional Mini-Link specific information. I have gathered some data points. I need to structure the article. I should cover introduction, accessing CLI, command modes, categories of commands (show, configuration, management, troubleshooting), and examples. I'll also include information from the ManageEngine page about backup and syslog commands. I'll also mention the default IP address (10.0.0.1) and the use of Putty. I will also reference the getnoc.com script list. I should also mention the CLI unlock command. I will also include information about the "write mem" command for saving configurations. I'll also mention the "show running-config" and "show startup-config" commands. I'll also include some "get" commands from the getnoc.com page. I should also mention the "show temp" command from the forum. I will also include a section on network synchronization and DCN configuration based on the PDFs. I will also include a troubleshooting section. I will cite the sources appropriately. I'll also mention that CLI is used for advanced configuration. Now I will write the article. Ericsson MINI-LINK family of microwave transmission products is a cornerstone of modern radio transport networks. While many tasks can be performed through graphical interfaces like MINI-LINK Craft, the Command Line Interface (CLI) is the most powerful and direct method for configuration, troubleshooting, and automation. This article provides a comprehensive guide to using the CLI on MINI-LINK platforms like the TN and CN series, from basic access to command examples across various functional categories.

Tests fundamental IP reachability to the far-end node or gateway. set radio-link [link_name] loopback [near-end/far-end/off] Use code with caution.

: Displays hardware info, serial numbers, and software versions.

To ensure the Network Management System (NMS) can reach the node, properly configure the IP routing table. ericsson mini link cli commands

show ip route : Outputs the current routing table, including the default gateway and static routes.

Changes are made permanent by syncing the running configuration to the startup configuration with write mem . For syslog management, use rsyslog enable to turn on syslog, rsyslog server 1 [IP Address] 514 to set up a remote logging server, rsyslog trapseverity 0x08 to set the severity level, and no rsyslog enable or no rsyslog server 1 [IP Address] 514 to disable or remove the logging target.

set interface ethernet speed duplex : Manually forces speed and duplex settings on a specific port.

Services map Ethernet traffic to radio bearers with QoS. : Exports the configuration file securely to a

Displays the status (Up/Down), speed, duplex mode, and error counters for all physical Ethernet ports. create vlan [vlan_id] name [vlan_name] Use code with caution.

Site check after installation

Before modifying any configuration, always verify the overall state of the node, hardware revisions, and software baselines.

Displays current temperature of each board and alarm thresholds Management Performs a "warm restart" on the Traffic Node Sends operator confirmation for class 1 objects Activates an active release or load module Standard CLI copy command for log or config files Configuration Submodes The CLI is organized into specific classes. Use the command followed by the sub-layer to modify settings: Interface Configuration: For physical and logical port settings. Protocol Configuration: For managing routing or communication protocols. Router Configuration: For IP-related routing tasks. LAN-DCN Commands: My search plan includes four phases: product overview,

Reports:

Upon connection, you must log in with your assigned credentials. : Initiates the session authentication process. logout / exit : Closes the current CLI session safely. Mode Navigation

| Shortcut | Function | |----------|----------| | ? | Context-sensitive help | | Tab | Auto-complete command | | Ctrl+A | Move cursor to start of line | | Ctrl+E | Move to end | | Ctrl+K | Delete from cursor to end | | up/down arrows | Recall history | | do | Execute show command from config mode (e.g., do show version ) | | no | Negate a command (e.g., no interface vlan1 shutdown ) |

ssh admin@192.168.1.200 "ethernet port stats 1/2"