Click to initiate the sequence. Do not touch or unplug the flash drive during this period.
Inside the settings panel, check the option for Preformat (low level format) . If the drive keeps erroring out, set the Target Capacity to slightly lower than its true maximum (e.g., set a 16GB drive to 14500) to safely bypass dead cells. Begin flashing: Click the Start button.
The PS2251-07 is a USB 3.0 controller chip made by Phison. You’ll usually find it inside mid-range to high-performance flash drives. The "PS2307" label is typically the firmware or bridge identifier that the MP Tool recognizes.
is one of the most widely deployed USB 3.0 controller chips in the world. Found inside popular flash drives from brands like Kingston, Toshiba, and Verbatim, this hardware is incredibly resilient but prone to specific firmware errors. phison ps225107ps2307 mptool
A small loader (e.g., BN07*.BIN ) that prepares the controller for the firmware.
Do not unplug the device under any circumstance. The slot block will transition from yellow/blue processing statuses to a solid Green "OK" window upon completion. ⚠️ Troubleshooting Common Failures Error / Symptom Root Cause Actionable Solution Error E255-1 (Header not accepted) Mismatched burner binary or protected hardware space.
Locate the section. Click browse and select your downloaded FW07*.BIN file. Click to initiate the sequence
本文将围绕 这一关键词，提供一个全面、深度的指南，涵盖主控型号识别、工具下载、详细量产步骤、常见错误解决及高级应用。
Navigate to your extracted MPALL directory and open . Select Advance Setting and click New Setting . In the Controller dropdown menu, select PS2251-07 .
You will need two distinct .BIN files tailored for the PS2251-07 controller: If the drive keeps erroring out, set the
The Phison PS2251-07/PS2307 is a reliable workhorse of the USB drive world, but it is not invincible. When faced with logical corruption, write-protection errors, or firmware failures, the is the ultimate, factory-grade solution for recovery. It arms you with the ability to perform low-level formatting, re-flash firmware, and even create complex bootable partitions.
: Users can manually set or change the Vendor ID (VID), Product ID (PID), Serial Number, and Manufacturer strings (e.g., changing a generic drive to "Kingston" or "SanDisk" naming).
The actual operating system of the USB drive that governs how data is read and written. 2. Choosing the Right Tool: MPALL vs. UPTool
If MP Tool fails mid-process and drive is unresponsive: